If you love coffee, then you probably have your own Cuisinart coffee maker at home. However, like anything that gets used every day, it will wear out. And in the case of a Cuisinart coffee maker, the filters will have to be replaced.
In this article, we discuss everything you need to know about Cuisinart coffee maker water filters, including its importance, benefits, and use instructions.
Water Filters: What Are They For?
Coffee is 98% water – and the quality of that water is as important as the quality of your coffee beans. If water does not taste good from the tap, then it won’t taste good in your coffee.
Cuisinart includes a charcoal water filter to remove bad tastes, chlorine, and other impurities, allowing you to enjoy the purest coffee flavor each time you brew.
Water filters use an activated carbon filter to eliminate chlorine, sediment, calcium, and also decrease the total hardness of the water. If these are not filtered out of the water, they can cause some issues with your coffee machine.
Some of these issues include performance and heating inefficiencies, scale build-up in the group head and boiler, blocked pipe fittings, and much more.
These problems can result in costly repair bills, sometimes costing so much that buying a new coffee machine may be cheaper.
Using unfiltered water in your Cuisinart coffee maker could significantly reduce the lifespan of the machine, so having a good water filter installed and replacing the filter when necessary is really important.
Furthermore, replacing your Cuisinart coffee maker water filters is important because the charcoal inside the filter traps the impurities, and over time, this filter can become congested with everything that it has collected. This leads to the filter being less effective at purifying the water that is run through it.
Benefits of Using a Cuisinart Coffee Maker Water Filter
Here are some of the benefits of using Cuisinart coffee maker water filters.
- Removes impurities, such as chlorine, calcium, sediment, and others, that interfere with the taste and quality of brewed coffee.
- Reduces the total hardness of water, preventing the build-up of gypsum and limescale deposits.
- Optimizes water for coffee production, which allows the production of aromatic and full-bodied brews.
SaleEveryday DCCF-12 Replacement Charcoal Water Filters for Cuisinart Coffee Makers, 12-Pack
- These replacement filters are specifically designed or all Cuisinart coffeemakers that require water filters
- Removes impurities (chlorine, odors, calcium & others) that interfere with taste and quality. For Best Results Replace Monthly
How Often Should Cuisinart Water Filter Be Replaced?
Replace the Cuisinart coffee maker water filter every 60 days or 60 uses (or more frequently if you use hard water). Cuisinart suggests that 60 days is ideal; however, they indicate that heavy use may require the user to replace the water filter more often.
How to Insert and Replace Cuisinart Coffee Maker Water Filters
Your Cuisinart coffee maker comes with a charcoal water filter that removes chlorine, calcium, odors, and other impurities from your water. It also reduces its total hardness.
- Inserting the Water Filter
Below is a step-by-step guide to inserting the water filter.
- Take out the filter from the polybag and soak it, fully immersed, in cold tap water for about 15 minutes.
- Lift the water filter holder out of the water reservoir.
- Press down on the water filter compartment and pull it toward you to open.
- Place the water filter into the holder and snap it closed. Improper placement of the filter can tear the filter skin, so be careful.
- Flush the filter by running cold tap water through holes in the bottom compartment for about 10 seconds.
- Allow the filter to drain completely.
- Slide the water filter holder back into the channel in the water reservoir. Push it down to the base of the unit.
Note: Cuisinart recommends changing the water filter every 60 days or 60 uses (or more frequently if you use hard water). Replacement filters can be bought online, in stores, by calling Cuisinart Customer Service, or a Cuisinart.
Cuisinart Coffee Maker Cleaning and Maintenance
Here is a step-by-step guide to clean and maintain your Cuisinart coffee maker:
- Always turn the coffee maker off and remove the plug from the electrical outlet before you start cleaning it.
- Lift up the reservoir cover.
- Take out and discard the paper filter and ground coffee. You can wash the filter basket using warm, soapy water. Rinse thoroughly. Or, you can also clean it in the upper rack of the dishwasher. Then, dry all parts after use.
- Do not put any water in the coffee maker once the filter basket has been removed. Wipe the area under the filter basket using a damp cloth.
- Take out the carafe from the heating plate and discard any remaining coffee. You can wash the carafe and lid warm, soapy water. Rinse thoroughly or place it in the upper rack of the dishwasher.
Note: Coffee contains oils that can accumulate on your carafe.
For best performance, wash the carafe regularly and wipe the pour spout clean after every use. Do not use any harsh cleaners or scouring agents on any part of the coffee maker.
Furthermore, never immerse the coffee maker itself in water or other liquids. To clean the base unit, simply wipe it using a clean, damp cloth and dry it before storing.
Fingerprints and other blemishes on the machine can be washed off with water and soap or a non-abrasive cleaning solution.
Wipe the heater plate using a clean, damp cloth. Never use abrasive, rough materials or cleansers to clean the heater plate. When drying the inside of the water reservoir, do not use a cloth as lint may be left behind. Any other servicing of your Cuisinart coffee maker should be performed by an authorized service representative.
The Bottom Line
The general consensus is that filtered water is the best for coffee making. There are different types of water filtration systems that you can use, but with a Cuisinart coffee maker, you don’t have to worry as it has a built-in charcoal water filter.
As coffee is mostly made up of water, obviously the water that you use to brew your coffee is going to have a significant impact on its taste.
Not only does it affect the taste of the coffee, but water can also affect the brewing equipment itself. Using filtered is particularly important when using a Cuisinart coffee maker, as the hard water can quickly calcify inside the machine.