Best Troubleshooting Methods On How To Fix When Your Gevi Espresso Machine Both Lights Blinking

Reasons Why Your Gevi Espresso Machine Both Lights Are Blinking

Are both lights for your Gevi espresso machine blinking? There could be several reasons behind it.

• Your Gevi machine is warming up. The Gevi machine light might be flashing simply because it is warming up. This will happen when you initially plug in the machine and press either button once.
  
  The buttons will begin blinking and not stop until the desired temperature is reached, then blinking will stop and the cup size buttons will turn solid, which is when you should select which cup size you prefer and the machine will begin brewing.

• Your Gevi machine is in descaling mode. One of the most common reasons behind a Gevi espresso machine both lights blinking is due to it accidentally being put into the descaling process.
  
  If you find that the lights are flashing at a quick rate and persist in flashing for long periods of time, then this is likely the case and you should follow the steps for exiting the descaling process.

• There’s a low water level in your Gevi machine’s reservoir. Another reason behind a Gevi espresso machine with both lights blinking is that it could be experiencing a lack of water.
  
  If the water tank becomes empty, then the machine will be unable to perform its functions and a light will turn on and start flashing. If you notice that the water tank is empty, then you should immediately fill it with water and the machine should turn off its light.

Here Are Some Other Troubleshooting Methods When Your Gevi Espresso Machine Both Lights Blinking

Other Common Espresso Machine Issues (+ Troubleshooting Methods)

Gevi espresso machine both lights blinking, machine not turning on, not producing adequate steam, frothing issues, espresso dispensing too quickly – these are just some common espresso machine issues that you might encounter.

Proper cleaning and maintenance, using the right kind of water and milk, and ensuring proper power supply should mitigate or remedy most of these issues.

Keep reading to learn more about the common espresso machine troubles you may have to deal with and what you could do about them.

Gevi espresso machine stops working. When your coffee machine suddenly stops working, any of the following could be the cause:

• The machine’s on/off switch, or power cord has been damaged. If the switch or cord has been damaged, get it replaced by a professional. Do not attempt the fix by yourself as an improper redressal or replacement could lead to potential safety hazards.
  
  If you cannot get hold of a technician or the manufacturer isn’t offering proper service, you may have to buy a new machine altogether (of course, not from the same company).
  
  
  • The valve could have been closed due to clogging. You can fix a clogged valve by fishing out the built-in debris using a toothpick.
    
    However, the calcium-clogged tubes could be taken care of by running vinegar through the coffee machine, followed by a couple of batches of water to ensure the vinegar is completely cleaned out.
    
    
  • Clogged tubes

Note: There are a couple of power-related problems that cannot be fixed: heating coil failure, and heat-sensitive switch failure. It is so because getting the right replacement parts for them could be quite challenging. Consult a professional.

• The espresso machine has a clogged filter basket. If your coffee has a weird flavor, a clogged filter basket could be the culprit. The reusable filter you use in your machine should be cleaned regularly as it could routinely get clogged up with coffee’s essential oils, causing a weird-tasting or weak brew as a result. To clean your filter after you are done brewing for the day:
  • Rinse the filter in soapy, warm water thoroughly
  • Let the filter run in your dishwasher’s upper rack
  • Either way, wipe the filter using a clean, damp cloth after the cleaning. For deeper cleaning, soak the filter in water and distilled mixture (1:2 ratio). Let it soak for a few hours. If you can, it would be better if you could leave them soaking overnight.
  • If you don’t have time to spare because it’s the only coffee machine in your house or shop, use a scrub brush with some baking soda instead. 

• The espresso machine doesn’t heat or release steam. Usually, an espresso machine doesn’t get hot or give out steam when its power switch is not in the right position. If you encounter this issue, try turning the machine off and on again.
  
  Most espresso machines come with power switches that could be positioned in multiple ways. This could be denoted by a single switch with varying positions or two unique switches.

• Espresso is dispensing too quickly. If the grind setting has been set too coarse or the machine’s handle hasn’t been dosed with enough coffee, your coffee could dispense at an increased pace from an espresso machine.
  
  To fix this problem, increase your dose or adjust your machine’s grinder to ensure finer coffee. Make sure you put in fresh coffee when you’re trying to set things right. 

• The espresso machine is leaking from the bottom. One of the primary reasons why a coffee machine starts to leak from underneath is a blocked drain. If you experience a leaking issue with your machine, your next question should be: ‘Is the leaking water clean or dirty?’
  
   If the leaking water is dirty, it usually means that the drain hose may have been blocked. The reasons for this blockage could be excessive quantities of milk or coffee grinds poured down the machine’s drip tray.

To fix this issue, make sure that the drain hose isn’t jammed. In case there is a drain hose blockage, use a degreaser solution or some hot water to unblock it. For a quick fix, it’s recommended you put some liquefied espresso cleaner down the trip tray.

• The espresso machine has a slow or no coffee supply. If your machine is dispensing coffee too slowly or supplying no coffee at all, its grind setting could be at fault. Most likely, it might have been set to too fine. Another reason could be an overdose of coffee.
  
  When you encounter this issue, take the handle off the machine’s group head and hit the volumetric key. Either the grind setting or coffee overdose could be the cause if the water is running fine.

In this case, change the grind coarser and adjust the dose that goes into the basket. But, if pressing the volumetric key results in the water exhibiting signs of just a drizzle or irregular running, the issue could be a bigger one, and you may have to call in a technician to check it.

Cleaning and Maintenance

To ensure that your espresso machine works properly, and to avoid issues like the Gevi espresso machine both lights blinking, the machine not turning on, not producing adequate steam, etc., proper cleaning and maintenance are necessary.

1. Turn off the coffee maker and let the coffee maker cool down completely before cleaning.
   
   
2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray, and removable cup shelf regularly then dry them.
   
   NOTE: Do not clean with alcohol or solvent cleaner. Never immerse the housing in water for cleaning.
   
   
3. Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then clean it with cleanser, but at last rinse with clear water.
   
   
4. Clean all the attachments in the water and dry them thoroughly.

Cleaning Mineral Deposits

1. To make sure your coffee maker operates efficiently, internal piping is clean and the flavor of coffee is optimal, you should clean away the mineral deposits left every 2-3months.
   
   
2. Fill the water tank with water and descaler to the MAX level (the proportion of water and descaler is 4:1, the detail refers to the instruction of descaler.
   
   Please use “household descaler”, you can use the citric acid (obtainable from chemists or drug stores) instead of the descaler (the one hundred parts of water and three parts of citric acid).
   
   
3. According to the preheating program, put the metal funnel (without coffee powder in it) and jug in place. Brew water asper ” PREHEATING”.
   
   
4. Press the Power button, the power indicator will be illuminated, press the Coffee button, work indicator is illuminated green, make sure the steam control knob is in the “0” position when there is water flowing out, press the Coffee button to stop pumping, and wait for a moment, the coffee maker begins to preheat.
   
   
5. When the Coffee button indicator is illuminated, it shows preheating is finished. Press the Coffee button, the work indicator is illuminated green, and make two cups of coffee (about 2Oz) press the Coffee button to stop pumping, work indicator is extinguished.
   
   
6. Press the Steam button, Coffee button indicator will be extinguished, wait until the Steam button indicator is illuminated. Make steam for 2min by turning the steam control knob, then turn the steam control knob to the “0” position to stop making steam.
   
   Press the Power button to turn off the unit immediately, and make the descaler deposit inside the unit for at least 15 minutes.
   
   
7. Press the Power button to restart the unit, wait until the Coffee button indicator will be illuminated, then press Coffee button to brew until no descaler is left.
   
   
8. Brew with tap water at the MAX level, repeat steps 4-6 for 3times, then brew until no water is left in the water tank.

The Bottom Line

This list of espresso machine issues is not exhaustive by any means, but they do represent some of the most common problems. If you take good care of your machine, clean it regularly, and keep up with its preventative maintenance schedules, you can be almost certain of not facing any trouble with your coffee maker.

If you encounter any of the problems listed above (i.e. Gevi espresso machine both lights blinking, machine not turning on, not producing adequate steam, etc.) their respective solutions should do the trick. However, if things don’t work out, call a professional or get in touch with the manufacturer if the machine is still under warranty.